Basic Product Information
Part Number: TLV62569PDDCT
Core Electrical Parameters
| Parameter |
Value |
Unit |
| Input Voltage Range |
2.5 to 5.5 |
V |
| Adjustable Output Voltage |
0.6 to VIN |
V |
| Maximum Output Current |
2 |
A |
| Switching Frequency |
1.5 (typ) |
MHz |
| High-Side Switch Rds(on) |
100 |
mΩ |
| Low-Side Switch Rds(on) |
60 |
mΩ |
| Quiescent Current (typ) |
35 |
μA |
| Shutdown Current (typ) |
<2 |
μA |
| Efficiency (typ) |
Up to 95 |
% |
| Control Mode |
Current-Mode PWM + PSM |
– |
| 100% Duty Cycle |
Yes (lowest dropout) |
– |
| Power Good Output |
Yes (open-drain) |
– |
| Internal Soft-Start |
Yes |
– |
| Over-Current Protection |
Yes (cycle-by-cycle) |
– |
| Thermal Shutdown |
Yes |
– |
| Enable Input |
Yes |
– |
| Pin-to-Pin Compatible |
TLV62568 |
– |
| Operating Temperature |
-40 to +125 |
°C |
Core Features & Advantages
The TLV62569PDDCT delivers 2A synchronous buck conversion with up to 95% efficiency in an ultra-compact SOT-23-THIN package, featuring integrated power MOSFETs and automatic power-save mode for light-load efficiency.
- Primary Function: 2A synchronous step-down DC-DC converter with adjustable output from 0.6V to VIN, optimized for general-purpose POL power supply from 2.5V–5.5V input rails.
- Advantages:
- Integrated 100mΩ/60mΩ synchronous MOSFETs — eliminates external Schottky diode and high-side switch, reducing BOM count and solution footprint to under 25mm².
- Automatic Power Save Mode (PSM) — seamlessly transitions from PWM to PFM at light loads, maintaining >80% efficiency down to 1mA output current.
- 100% duty cycle operation — enables near-zero dropout when VIN approaches VOUT, extending usable battery range in single-cell Li-ion applications.
Typical Application Scenarios
- Industry: Consumer / Industrial / Networking
- Equipment: Set-top boxes, wireless routers, network cameras, hard disk drives, portable devices
- Use Cases:
- General-purpose 3.3V or 1.8V POL supply from 5V or 3.6V rail in space-constrained networking equipment.
- Single-cell Li-ion (3.0V–4.2V) to 1.8V/1.2V buck conversion in portable instruments with PSM extending battery life.
- Post-regulation after a front-end DC-DC or USB power source, providing clean 1.2V core voltage for FPGAs/SoCs.
Market Reference Price
| Market |
Price Range |
Currency |
| Huaqiangbei Spot |
$0.35 – $0.70 |
USD |
| Overseas B2B |
$0.55 – $1.20 |
USD |
Related Models Comparison
| Model |
Difference |
Application |
| TLV62568DBVR |
1A version (vs 2A), same SOT-23-6 pinout, pin-to-pin compatible |
Lower-current POL supplies up to 1A |
| TLV62569P |
Same 2A converter with additional Power Good (PG) output pin in SOT-563-6 |
Applications requiring power-good sequencing signal |
| TPS62A02 |
Newer generation, higher efficiency, wider VIN (up to 17V), 2A in SOT-5X3 |
Higher input voltage POL supplies needing 17V headroom |
